خانه / استخدامی مناطق ویژه / فرصت های شغلی Amec Foster Wheeler در امارات متحده عربی

فرصت های شغلی Amec Foster Wheeler در امارات متحده عربی

فرصت های شغلی Amec Foster Wheeler در امارات متحده عربی

(برای اطلاعات بیشتر روی هر شغل کلیک نمائید)

 

Wood is recruiting for an Construction Supervisor (Electrical) to be based offshore on a 4 weeks on 4 weeks off rotation on ADNOC Offshore project.Successful candidate must fulfill the below responsibilities and duties;   – Accountable for accurate and consistent preparation and execution of the project electrical work scope, installation and testing. – Adherence to the selected erection sequence in accordance with the project schedule. Preparation of electrical work packs – Liaise with the design team to ensure constructability input is built into the design and that the detail design is installation friendly and in line with the construction priorities – Play an active role in ensuring that all project HSE goals are achieved and where possible exceeded. Ensure all work is carried out in a safe and productive manner in line with Company and Client processes and procedures – Process safe completion of designated sub systems and systems in line with the project schedule and milestones in a consistent and timely manner. Assist in maintenance of the project budget through diligence and utilization of efficient and working practices – Be conversant with HSE plan and to implement the HSE procedures ensuring the health and safety of personnel – Assess effectiveness of working practices and systems with a view to continuously improving systems, personnel and team performances – Ensure that constructability is inherent within the design by being involved at the early stage of work scope and workpack compilation / development in accordance with company and project policies and procedures – Prepare workpacks including TRA’s, JMS, materials, Peer reviews, HAZID’s, Envid’s, COSHH, testing requirement, specialist tools and equipment, also identify specialists / vendors to perform identified tasks – Develop certification matrix with design team prior to workpack issue. Develop workscope estimates and register changes with supporting documentation – Compile, review and develop workpacks in accordance with the implementation process, associated standards, specifications and procedures – Ensure contents of workpacks meet with scope requirements. Raise and obtain approval for growth job cards. Ensure logic of work is updated on the plan and supporting systems – Conduct offshore surveys with design team. Address installation queries and revert with solutions – Monitor design delivery dates. Monitor and report on workpack progress. Monitor ongoing activities with regards to completion dates. Monitor punch-list closeouts after handover – Check completed workpacks prior to handover, raise punch lists if appropriate. Manage / action accordingly. Review completion certification and ‘as-build’ drawings – Identify resource requirements / materials / tools / spares / consumables / etc. Actively participate in all Company and Project Safety Initiatives. Attend meetings, (e.g. Kick-off and daily / weekly)

Vacancy Type

Fixed Term

 

 

Wood is currently recruiting for an Instrument & Control Engineer to strengthen our team in Abu Dhabi, UAE   – The I&C Engineer is primarily engaged in the design, preparation of specification, data sheets and analysis of I&C engineering requirements on a project. Support on tender or proposal, as per client standards, international codes, and project scope of work – Planning and supporting on Instrumentation engineering design for field instrumentation, Control System, preparation of basic design, data sheets, Specifications, support on design deliverables, FEED and detailed design of the instrumentation and controls part of the project – Ensuring that the design is carried out as per the industry standard practices and in conformance with the quality management system – Co-ordination with Project and client – Assisting in the preparation of project proposals and pre-qualification documents in what relates to Instrumentation engineering design – Identification of issues that impede project progress and reporting to Project Managers and Discipline Heads – Assimilating the evolution of new products and technology, and updating oneself on the latest international standards in terms of engineering design practices and their applications; – Identifying new methodology of work process required for higher productivity – As Lead Discipline Engineer, when assigned on projects, responsible for managing the team of engineers, designers, and delivering the engineering requirements of the project

Vacancy Type

Staff / Permanent

 

 

Wood is currently looking to recruit a highly competent Senior Instrument Engineer in UAE for one of its projects with ADNOC.    Successful candidate must perform below duties; – Estimate and execute instrument engineering activities (Concept, Front End Engineering Development, and Technical Study & Detailed Design) – Achieve safety standards as defined in personal performance contract – Responsible for assessing effectiveness of working practices and systems with a view to continuously improving systems – Carry out work in accordance with company and project Health, Safety, Environmental and Quality systems – Maintain the required technical quality or work – Identify scope and schedule changes in accordance with Change Control Process – Ensure that designs comply with the relevant procedures, standards and regulations – Ensure, as far as practically possible, that all assigned work is carried out in compliance with agreed budget and schedule – Keep up to date with technical developments, National and International standards and legislative requirements related to the discipline – Prepare estimates and schedules and assist in their review – Maintain good communication with the Client and visit Assets when necessary

Vacancy Type

Fixed Term

 

 

Wood is currently recruiting for a Mechanical Engineer – Rotating Equipment to strengthen our team in Abu Dhabi, UAE   – Prepare mechanical datasheets for rotating equipment (kinds of pumps, compressors, agitator, etc.) and package (cooling tower, chiller, material handing package), technical bid evaluation, Material requisitions and vendor documents review (after purchase order) – Supply technical support for equipment FAT and SAT. – Execution of assigned work in accordance with applicable contract procedures, codes and standards. – Perform activities such as – issue of Material Requisitions and Technical Bid Evaluations as per relevant Technical Practices. – Review Vendor Drawings and Documentation as per relevant Technical Practices. – Follow the Ethics of Confidentiality on technologies licensed by Client or Third Party. – Ensure Project Filing is maintained as per Quality Procedures. – Liaise with other Groups as necessary – Ensure Timely Production of Deliverables. – Carry out Proper Closeout of all Project related work. – Attend internal FW and Vendor co-ordination meetings and engineering review meetings as required in order to establish full understanding of scope of supply and all FW/Vendor interfaces. – Ensure high Quality of work within the established/assigned man-hour budgets and schedule targets.

Vacancy Type

Staff / Permanent

 

 

Wood is looking to appoint a Principal Structural Integrity Engineer to join our office in Abu Dhabi.   This is an excellent opportunity for the right candidates to develop their career, contribute to a successful global team, and play their part in developing  the Structural Integrity Management business within Wood in Middle-East.     Opportunity   – Exciting opportunity within Wood – Exposure to all aspects of the Wood business – Dynamic and highly technically skilled group – Based in Abu Dhabi, developing Structural Integrity business in the region and working for clients across the world – Projects covering structural integrity management and advanced structural analysis  within the oil and gas (upstream and downstream), mining, and other energy sectors, – Involvement in structural engineering, concept, FEED studies, detailed design, life extension of mature assets and decommissioning, – Develop strong client relationships, provide support to business development – Continue to develop our industry leading approach to Structural Integrity Management – Take responsibility for business development,  scope development, scheduling, delivery and budget responsibility   Detailed Description   – Managing structural analysis activities – Supporting operations, structural assurance, major projects, life extension, and decommissioning activities across the Wood portfolio – Develop and provide emergency response systems – Code compliance assessments – Supervision and development of other team members – Maintain and develop client, and 3rd party relationships – Enhance your expertise in this field, maintain knowledge of industry trends and innovations – Assist in development of internal processes and  procedures – Scope definition, CTR preparation – Budget, delivery and financial responsibility – Significant input to business development and the bidding process  

Vacancy Type

Staff / Permanent

 

 

Provide direction to the IPMT and UZAI operations to enable earliest safe first production of hydrocarbons from the facility. This will be achieved by ensuring that both the Project and facilities are in a suitable state of readiness i.e. all required systems are properly commissioned and handed over, required start-up procedures are in place and understood and the work force is suitably prepared.   Responsibilities – Safe delivery of start up with zero hydrocarbons releases during start up activities. – Ensuring the facility meets requirements for handover. – Ensuring start up and handover of the facilities exceed the business plan; this includes safe introduction of hydrocarbons, efficient ramp up of production and capability of facilities to deliver intended production efficiency.   – Key Duties   – Providing visible safety leadership at project sites, through site visits, participation in audits and driving demonstrable safety behaviours. – Ensure emergency response processes remain effective through-out commissioning and start-up. – Ensuring effective control of work arrangements are in place for all operational commissioning and start-up activities. – Development of operational plan for all project commissioning and start-up related activities. –   – Integrate with the UZAI management team to minimise production losses related to project activities and maximize use of resources. and potential for learning and competence building. – Management of interface between IPMT and asset management team. – Integrate with IPMT for development of commissioning and start-up plans. – Effective communication with key stakeholders. – Interact as required with shareholders. –   – Review and ensure delivery of requirements for “Ready for Start Up” and “Handover”. – Review and agreement of final system performance testing criteria and verification of system performance testing prior to introduction of hydrocarbons and then handover. – Development of initial startup procedures and plan to align with the UZAI Operations team, Subsea, Brownfield and Commissioning activities. – Identify Standard Operating Procedures requirements and Plant Operating Manual amendments as required. – Ensure Operations assurance activities are carried out against an agreed plan. – Review Operations Readiness plan to identify gaps for improvement. – Ensure transition plans are in place and adequate from project to operations including systems, processes and responsibilities (including business systems). – Ensure all spares for commissioning and start-up are identified and available complete with recommendations for operational phase. –   – Ensure additional resources are in place to support commissioning and start up as required. – Ensure sufficient number of competent personnel are available to commission and start up the facility. – In co-ordination with UZAI management team ensure the operations and maintenance technicians are engaged in startup planning, familiarization and readiness reviews. – Performance management of direct reports and their teams (anticipated start up team of around 20 people including onshore and offshore) –   – Ensure final handover and acceptance by the UZAI management team is carried out in a transparent manner with punch listing criteria established as well as any transfer of budget responsibility.   – Education Attainment & Accreditation            Preferably degree qualified (or equivalent) in an engineering discipline  

Vacancy Type

Fixed Term

 

 

Wood is currently looking to recruit for a Offshore Instrument and Control Commissioning Engineer on one of its prestigious multibillion ADNOC Offshore projects to be based offshore on a rotational basis.   Successful candidate will be responsbile to perform the below duties and responsibilities.   Must have practical hands on field experience during all stages of project life Construction, Commissioning and start up and be able to communicate with team leaders of a multi-discipline team. Be a team player who can provide valuable input during both planning and execution phase. Must have working knowledge and understanding of yokogawa ICSS – Assist commissioning group and operations personnel assigned to the commissioning group at the onshore and offshore locations – Assist Co-ordination and execution of the commissioning activities at the onshore and offshore locations – Assist Co-ordination liaison for all interfaces on site and with all integrity groups to ensure to ensure the project requirements and performance standards are achieved, including maintaining schedule and cost targets – Review Operational Test Procedures associated with the Commissioning of Instrument systems; Fire & Gas System. ICSS Commissioning Interface. Safety & Controls Interface. DCS. VESDA System. Riser ESV Testing. Radio VHF, PABX, CCTV, Intruder detection. MPFM. FOC. CP. UPS etc – Assist with WHT / Main Complex commissioning Interface – Be familiar with AVEVA, INtools – Understanding working knowledge of solar panel power systems – Provide input for the most effective use of vendors – Provide input during project review of ITR / ITP including system/s allocation during CMS population – have execution and working knowledge of CMS used on major projects ICAPS, GOC, Winpcs  – Witness factory test as necessary – Assist in the N2 leak testing project execution – Review of subsea flow controls and wellhead operation – Input to the development of the detailed plan and planning systems including reporting of progress – Attending Commissioning and inter Department meetings – Support of the discipline commissioning engineers in achieving the commissioning scope – Support Liaison with independent inspection authorities and demonstrate facilities as required to satisfy the project performance standards and legislative requirements – Ensure that changes implemented during the commissioning activities are approved and documented – Provide Review of TQ’s, EQ’s, and SI’s insuring that they are included in the Commissioning scope where applicable – Provide Assistance and directive in the Preparation of requisitions, technical specifications for materials, equipment and consumable required to perform the commissioning scope of work – Participate in the hand over acceptance of system/s sub-system/s with the Mechanical Completion and Operations group – Promote project safe working practices in line with the safety management systems – Provide positive input in Planning and scheduling the correct resource levels – Liaison with construction in providing and achieving the milestone objectives – Ensure that the relevant permit to work is in place prior to commencement of work

Vacancy Type

Fixed Term

 

 

Wood is currently recruiting for an Mechanical Construction Supervisor for ADNOC Offshore – UZ750. Position will be initially based onshore in Abu Dhabi contractor office for few weeks before it relocated to offshore on Island on rotation basis. Successful candidate must peform below duties and responsibilities; – Actively drive safety performance in the fabrication yard and site – Resolve QC issues / disputes – Review and approve Construction Method Statements – Review and approval Material requests – Coordinate project logistics activities (module shipment, vehicle inspections, Fuel / diesel requests etc…) – Interface Management with other Contractors – Participate in and advise on all mechanical construction activities and initiatives – Responsible for the scope to ensure the Contractor and sub-contractors perform the work to agreed scope of work, specifications and schedules all to an acceptable standard – Supervise the contractor and sub-contractor personnel to ensure contractor performs all work to agreed standards for safety, health and environment and to attaining high levels of HSE performance – Ensure assigned scope of work is carried out without any significant HSE incidents – Ensure the work is carried out in time and in accordance with scope of work, specification and quality requirement – Promote HSE awareness and ensure that all Project HSE requirements are implemented and adhered to – Responsible for construction mechanical and piping activities through the contractors supervision in respect of HSE, method, working practices, quality and timely execution of the works – Advise mechanical and piping Project staff on best practices – Responsible for the Project staff aspect of Risk Management to ensure all risks / opportunities are identified and appropriate controls / mitigations developed and implemented – Ensure that construction hazards and risks are fully considered by designers and contractors and that appropriate mitigation actions are implemented and appropriate action taken – To be fully familiar with the contractors methods of construction, schedule and procedure – Initiate and manage the project element of the continuous improvement processes – Monitor site mechanical activities for potential contractual / claims problems – Maintain records of site activities and check Contractor records for accuracy – Carry out inspection, surveillance witnessing of contractor activities, ensuring records are maintained, including as-built data – Endorse daily progress report and time sheets – Detailing the work progress, number of contractor personnel and equipment available on site and other related items identified in the scope of work

Vacancy Type

Staff / Permanent

 

 

Wood is currently recruiting for a Senior Field Engineer for its multi-billion dollar oil and gas project in UAE with ADNOC Offshore.   This role will be based initially onshore until mobilized to site offshore on Island for a period of 9 months with possible extension on a 6 weeks on 3 weeks off rotation. If interested in role duration and rotation apply.   Successful candidate must be able to; – Participate in and advise on all construction activities and initiatives – To ensure the Contractor and sub-contractors perform the work to agreed scope of work, specifications and schedules all to an acceptable standard – Supervise the contractor and sub-contractor personnel to ensure contractor performs all work to agreed standards for safety, health and environment and to attaining high levels of HSE performance – Ensure assigned scope of work is carried out without any significant HSE incidents – Ensure the work is carried out in time and in accordance with scope of work, specification and quality requirement – Promote HSE awareness and ensure that all ADNOC Offshore Project HSE requirements are implemented and adhered to – Responsible for construction civil and structural activities through the contractors supervision in respect of HSE, method, working practices, quality and timely execution of the works – Advise ADNOC Offshore Project staff on best practices – Responsible for the ADNOC Offshore Project staff aspect of Risk Management to ensure all risks / opportunities are identified and appropriate controls / mitigations developed and implemented – Ensure that construction hazards and risks are fully considered by designers and contractors and that appropriate mitigation actions are implemented and appropriate action taken – To be fully familiar with the contractors methods of construction, schedule and procedure – Initiate and manage the civil and structural project element of the continuous improvement processes – Monitor site activities for potential contractual / claims problems – Maintain records of site activities and check Contractor records for accuracy – Carry out inspection, surveillance witnessing of contractor activities, ensuring records are maintained, including as-built data – Endorse daily progress report and time sheets – Detailing the work progress, number of contractor personnel and equipment available on site and other related items identified in the scope of work

Vacancy Type

Staff / Permanent

 

 

Wood is currently recruiting for Construction Engineer – Mechanical for one of its ADNOC Onshore oil and gas projects in UAE.   The successful candidate will be based at site on a residential basis to work 50hrs / 5 days per week with 2 days off.    Successful candidate should be able to peform the below duties and responsibilities; – Monitor the Mechanical scope to ensure EW Contractor and sub-contractors perform the work to agreed scope of work, specifications, and schedules and to an acceptable standard – Supervise the EW contractor and sub-contractor personnel to ensure EW contractor performs all work to agreed standards for safety, health and environment and to attaining high levels of HSE performance – Ensure assigned scope of work is carried out without any significant HSE incidents – Ensure the work is carried out in time and in accordance with scope of work, specification and quality requirement – Responsible for construction mechanical activities through the contractors supervision in respect of HSE, method, working practices, quality and timely execution of the works – To be fully familiar with the assigned scope of work and interlaces with existing facilities, other projects and disciplines – To be fully familiar with the ADNOC Onshore and Contractor HSE requirements and procedures – Ensure that construction hazards and risks are fully considered by designers and contractors and that appropriate mitigation actions are implemented and appropriate action taken – To be fully familiar with the contractors methods of construction, schedule and procedure – Initiate and manage the project continuous improvement processes – Ensure contractor produces appropriate execution documents in a timely manner and monitor approval / compliance – Monitors progress and performance of the construction contractor to ensure that he performs to the approved schedule, specification and standards – Interface with other IPMT groups as required to ensure a good relationship for timely and effective release of Contractors data / drawings and resolution of problems – Review look ahead schedules & ensure future work / discipline / interface issues are communicated and resolved – Monitor site activities for potential contractual/claims problems Maintain records of site activities and check Contractor records for accuracy – Carry out inspection, surveillance witnessing of contractor activities, ensuring records are maintained, including as-built data – Prepare and / or endorse daily progress report and time sheets detailing the work progress, number of contractor personnel and equipment available on site and other related items identified in the scope of work  

Vacancy Type

Fixed Term

 

 

Wood is currently recruiting for Senior Construction Engineer – Mechanical for one of its ADNOC Onshore oil and gas projects in UAE.   The successful candidate will be based at site on a residential basis to work 50hrs / 5 days per week with 2 days off.    Successful candidate should be able to peform the below duties and responsibilities; – Monitor the Mechanical scope to ensure EW Contractor and sub-contractors perform the work to agreed scope of work, specifications, and schedules and to an acceptable standard – Supervise the EW contractor and sub-contractor personnel to ensure EW contractor performs all work to agreed standards for safety, health and environment and to attaining high levels of HSE performance – Ensure assigned scope of work is carried out without any significant HSE incidents – Ensure the work is carried out in time and in accordance with scope of work, specification and quality requirement – Responsible for construction mechanical activities through the contractors supervision in respect of HSE, method, working practices, quality and timely execution of the works – To be fully familiar with the assigned scope of work and interlaces with existing facilities, other projects and disciplines – To be fully familiar with the ADNOC Onshore and Contractor HSE requirements and procedures – Ensure that construction hazards and risks are fully considered by designers and contractors and that appropriate mitigation actions are implemented and appropriate action taken – To be fully familiar with the contractors methods of construction, schedule and procedure – Initiate and manage the project continuous improvement processes – Ensure contractor produces appropriate execution documents in a timely manner and monitor approval / compliance – Monitors progress and performance of the construction contractor to ensure that he performs to the approved schedule, specification and standards – Interface with other IPMT groups as required to ensure a good relationship for timely and effective release of Contractors data / drawings and resolution of problems – Review look ahead schedules & ensure future work / discipline / interface issues are communicated and resolved – Monitor site activities for potential contractual/claims problems Maintain records of site activities and check Contractor records for accuracy – Carry out inspection, surveillance witnessing of contractor activities, ensuring records are maintained, including as-built data – Prepare and / or endorse daily progress report and time sheets detailing the work progress, number of contractor personnel and equipment available on site and other related items identified in the scope of work  

Vacancy Type

Fixed Term

 

 

Wood is currently bidding for a major client in Abu Dhabi for 4 months contract with a possibility of an extension. If awarded the work, we will have a requirement for a Lead Quality Engineer to join the business.  Please note that at this stage, applications for this role are invited as an Expression of Interest (EOI) whilst opportunities are being fully determined.   Job Description: Client intends to unify the use of standards and specifications across its group of companies, and therefore, require producing new Standard Specifications, with the following objectives: – Standardization across the group will drive Cost Effectiveness, both upfront CAPEX and operating/life cycle costs by eliminating ‘Nice to have’ requirements and adopting ‘Must to have or Fit for purpose’ approach. – Enhance interchangeability of materials will lead to Optimized inventory management and maintenance costs, thereby enhancing profitability. – Supports In-Country Value (ICV) initiative. – Enhanced Project Delivery performance (Cost/Time Benefit) Candidate Role: – Review and compare Client’s Specifications across group of companies – Combine and update the same considering the technical requirements, Quality requirements and Cost optimisation in liaison with client and project team – Provide logical and consistent written technical direction relating to respective discipline specifications development. – Liaise with other disciplines in the design team and the Client    

Vacancy Type

Fixed Term

 

 

Wood is currently bidding for a major client in Abu Dhabi for 4 months contract with a possibility of an extension. If awarded the work, we will have a requirement for a Lead Process Engineer to join the business.  Please note that at this stage, applications for this role are invited as an Expression of Interest (EOI) whilst opportunities are being fully determined.   Job Description: Client intends to unify the use of standards and specifications across its group of companies, and therefore, require producing new Standard Specifications, with the following objectives: – Standardization across the group will drive Cost Effectiveness, both upfront CAPEX and operating/life cycle costs by eliminating ‘Nice to have’ requirements and adopting ‘Must to have or Fit for purpose’ approach. – Enhance interchangeability of materials will lead to Optimized inventory management and maintenance costs, thereby enhancing profitability. – Supports In-Country Value (ICV) initiative. – Enhanced Project Delivery performance (Cost/Time Benefit) Candidate Role: – Review and compare Client’s Specifications across group of companies – Combine and update the same considering the technical requirements, Quality requirements and Cost optimisation in liaison with client and project team – Provide logical and consistent written technical direction relating to respective discipline specifications development. – Liaise with other disciplines in the design team and the Client    

Vacancy Type

Fixed Term

 

 

Wood is currently bidding for a major client in Abu Dhabi for 4 months contract with a possibility of an extension. If awarded the work, we will have a requirement for a Lead Techncial Safety Engineer to join the business.  Please note that at this stage, applications for this role are invited as an Expression of Interest (EOI) whilst opportunities are being fully determined.   Job Description: Client intends to unify the use of standards and specifications across its group of companies, and therefore, require producing new Standard Specifications, with the following objectives: – Standardization across the group will drive Cost Effectiveness, both upfront CAPEX and operating/life cycle costs by eliminating ‘Nice to have’ requirements and adopting ‘Must to have or Fit for purpose’ approach. – Enhance interchangeability of materials will lead to Optimized inventory management and maintenance costs, thereby enhancing profitability. – Supports In-Country Value (ICV) initiative. – Enhanced Project Delivery performance (Cost/Time Benefit) Candidate Role: – Review and compare Client’s Specifications across group of companies – Combine and update the same considering the technical requirements, Quality requirements and Cost optimisation in liaison with client and project team – Provide logical and consistent written technical direction relating to respective discipline specifications development. – Liaise with other disciplines in the design team and the Client    

Vacancy Type

Fixed Term

 

 

Wood is currently bidding for a major client in Abu Dhabi for 4 months contract with a possibility of an extension. If awarded the work, we will have a requirement for a Lead Instrument & Control Engineer to join the business.  Please note that at this stage, applications for this role are invited as an Expression of Interest (EOI) whilst opportunities are being fully determined.   Job Description: Client intends to unify the use of standards and specifications across its group of companies, and therefore, require producing new Standard Specifications, with the following objectives: – Standardization across the group will drive Cost Effectiveness, both upfront CAPEX and operating/life cycle costs by eliminating ‘Nice to have’ requirements and adopting ‘Must to have or Fit for purpose’ approach. – Enhance interchangeability of materials will lead to Optimized inventory management and maintenance costs, thereby enhancing profitability. – Supports In-Country Value (ICV) initiative. – Enhanced Project Delivery performance (Cost/Time Benefit) Candidate Role: – Review and compare Client’s Specifications across group of companies – Combine and update the same considering the technical requirements, Quality requirements and Cost optimisation in liaison with client and project team – Provide logical and consistent written technical direction relating to respective discipline specifications development. – Liaise with other disciplines in the design team and the Client    

Vacancy Type

Fixed Term

 

 

Wood is currently bidding for a major client in Abu Dhabi for 4 months contract with a possibility of an extension. If awarded the work, we will have a requirement for a Lead Civil & Structural Engineer to join the business.  Please note that at this stage, applications for this role are invited as an Expression of Interest (EOI) whilst opportunities are being fully determined.   Job Description: Client intends to unify the use of standards and specifications across its group of companies, and therefore, require producing new Standard Specifications, with the following objectives: – Standardization across the group will drive Cost Effectiveness, both upfront CAPEX and operating/life cycle costs by eliminating ‘Nice to have’ requirements and adopting ‘Must to have or Fit for purpose’ approach. – Enhance interchangeability of materials will lead to Optimized inventory management and maintenance costs, thereby enhancing profitability. – Supports In-Country Value (ICV) initiative. – Enhanced Project Delivery performance (Cost/Time Benefit) Candidate Role: – Review and compare Client’s Specifications across group of companies – Combine and update the same considering the technical requirements, Quality requirements and Cost optimisation in liaison with client and project team – Provide logical and consistent written technical direction relating to respective discipline specifications development. – Liaise with other disciplines in the design team and the Client    

Vacancy Type

Fixed Term

 

 

Wood is currently bidding for a major client in Abu Dhabi for 4 months contract with a possibility of an extension. If awarded the work, we will have a requirement for a Lead Piping Engineer to join the business.  Please note that at this stage, applications for this role are invited as an Expression of Interest (EOI) whilst opportunities are being fully determined.   Job Description: Client intends to unify the use of standards and specifications across its group of companies, and therefore, require producing new Standard Specifications, with the following objectives: – Standardization across the group will drive Cost Effectiveness, both upfront CAPEX and operating/life cycle costs by eliminating ‘Nice to have’ requirements and adopting ‘Must to have or Fit for purpose’ approach. – Enhance interchangeability of materials will lead to Optimized inventory management and maintenance costs, thereby enhancing profitability. – Supports In-Country Value (ICV) initiative. – Enhanced Project Delivery performance (Cost/Time Benefit) Candidate Role: – Review and compare Client’s Specifications across group of companies – Combine and update the same considering the technical requirements, Quality requirements and Cost optimisation in liaison with client and project team – Provide logical and consistent written technical direction relating to respective discipline specifications development. – Liaise with other disciplines in the design team and the Client    

Vacancy Type

Fixed Term

 

 

Wood is currently bidding for a major client in Abu Dhabi for 4 months contract with a possibility of an extension. If awarded the work, we will have a requirement for a Lead Static Equipment Engineer to join the business.  Please note that at this stage, applications for this role are invited as an Expression of Interest (EOI) whilst opportunities are being fully determined.   Job Description: Client intends to unify the use of standards and specifications across its group of companies, and therefore, require producing new Standard Specifications, with the following objectives: – Standardization across the group will drive Cost Effectiveness, both upfront CAPEX and operating/life cycle costs by eliminating ‘Nice to have’ requirements and adopting ‘Must to have or Fit for purpose’ approach. – Enhance interchangeability of materials will lead to Optimized inventory management and maintenance costs, thereby enhancing profitability. – Supports In-Country Value (ICV) initiative. – Enhanced Project Delivery performance (Cost/Time Benefit) Candidate Role: – Review and compare Client’s Specifications across group of companies – Combine and update the same considering the technical requirements, Quality requirements and Cost optimisation in liaison with client and project team – Provide logical and consistent written technical direction relating to respective discipline specifications development. – Liaise with other disciplines in the design team and the Client    

Vacancy Type

Fixed Term

 

 

Wood is currently bidding for a major client in Abu Dhabi for 4 months contract with a possibility of an extension. If awarded the work, we will have a requirement for a Lead Rotating Equipment Engineer to join the business.  Please note that at this stage, applications for this role are invited as an Expression of Interest (EOI) whilst opportunities are being fully determined.   Job Description: Client intends to unify the use of standards and specifications across its group of companies, and therefore, require producing new Standard Specifications, with the following objectives: – Standardization across the group will drive Cost Effectiveness, both upfront CAPEX and operating/life cycle costs by eliminating ‘Nice to have’ requirements and adopting ‘Must to have or Fit for purpose’ approach. – Enhance interchangeability of materials will lead to Optimized inventory management and maintenance costs, thereby enhancing profitability. – Supports In-Country Value (ICV) initiative. – Enhanced Project Delivery performance (Cost/Time Benefit) Candidate Role: – Review and compare Client’s Specifications across group of companies – Combine and update the same considering the technical requirements, Quality requirements and Cost optimisation in liaison with client and project team – Provide logical and consistent written technical direction relating to respective discipline specifications development. – Liaise with other disciplines in the design team and the Client    

Vacancy Type

Fixed Term

 

 

Wood is currently bidding for a major client in Abu Dhabi for 4 months contract with a possibility of an extension. If awarded the work, we will have a requirement for a Lead Electrical Engineer to join the business.  Please note that at this stage, applications for this role are invited as an Expression of Interest (EOI) whilst opportunities are being fully determined.   Job Description: Client intends to unify the use of standards and specifications across its group of companies, and therefore, require producing new Standard Specifications, with the following objectives: – Standardization across the group will drive Cost Effectiveness, both upfront CAPEX and operating/life cycle costs by eliminating ‘Nice to have’ requirements and adopting ‘Must to have or Fit for purpose’ approach. – Enhance interchangeability of materials will lead to Optimized inventory management and maintenance costs, thereby enhancing profitability. – Supports In-Country Value (ICV) initiative. – Enhanced Project Delivery performance (Cost/Time Benefit) Candidate Role: – Review and compare Client’s Specifications across group of companies – Combine and update the same considering the technical requirements, Quality requirements and Cost optimisation in liaison with client and project team – Provide logical and consistent written technical direction relating to respective discipline specifications development. – Liaise with other disciplines in the design team and the Client    

Vacancy Type

Fixed Term

 

 

 

Wood is currently bidding for a major client in Abu Dhabi for 4 months contract with a possibility of an extension. If awarded the work, we will have a requirement for a Lead Pipeline Engineer to join the business.  Please note that at this stage, applications for this role are invited as an Expression of Interest (EOI) whilst opportunities are being fully determined.   Job Description: Client intends to unify the use of standards and specifications across its group of companies, and therefore, require producing new Standard Specifications, with the following objectives: – Standardization across the group will drive Cost Effectiveness, both upfront CAPEX and operating/life cycle costs by eliminating ‘Nice to have’ requirements and adopting ‘Must to have or Fit for purpose’ approach. – Enhance interchangeability of materials will lead to Optimized inventory management and maintenance costs, thereby enhancing profitability. – Supports In-Country Value (ICV) initiative. – Enhanced Project Delivery performance (Cost/Time Benefit) Candidate Role: – Review and compare Client’s Specifications across group of companies – Combine and update the same considering the technical requirements, Quality requirements and Cost optimisation in liaison with client and project team – Provide logical and consistent written technical direction relating to respective discipline specifications development. – Liaise with other disciplines in the design team and the Client    

Vacancy Type

Fixed Term

 

 

 

 

Wood is currently recruiting for a Senior Process Engineer based in Abu Dhabi for a permanent assignment.   Purpose: – Contributing to the delivery of engineering excellence through: – Executing assigned scopes of work. – Supporting and supervising task delegation to team. – Providing process engineering discipline expertise to the business.  Functional Competencies – Technically competent in own discipline and actively maintains own competence according to standards and pursues continuous professional development. – Provide discipline support to the business. – Ensure self-awareness of relevant regulatory framework, legislation changes, initiatives and industry technology developments and promote to direct reports. – Provide discipline input to scope definition and execution. – Deputising for principal as required. – Supporting and supervising tasks delegated to direct reports. – Executing assigned personal objectives – Management of third party suppliers in the execution of Engineering delivery. Responsiblities – Keep informed, by all possible means, of technical developments in process industries and make recommendations to Chief/Principal Process Engineer on methods of improving Wood’s competitive position from a technical standpoint. – Deputise for Chief/Principal Process Engineer as requested.  – Keep Chief/Principal Process Engineer informed as to progress of assigned engineers and their potential for accepting increased responsibility. – Ensure that the requirements of Licensor’s / Client’s Secrecy Agreements are known and complied with in the work performed.  – Review and approve project schedules with the Project Engineer to see that all dates, rates of progress and design periods are realistic. – Advise the Lead / Chief/ Principal Process Engineer of any deviations and their causes and proposed corrective action. – Advise the Lead / Chief/ Principal Process Engineer of any technical problems and unresolved differences with other groups. – Notify the Project Engineer of all deficiencies in the flow of data or other basic information required for execution of work. – Provide information, where necessary, for estimating the cost of contract changes. Alert the Project Engineer / Project Manager to circumstances considered to constitute a contract change. – Carry out simulations of processes using simulation packages (such as ChemCad, Aspen, Pro II, Hysys etc.). Review and check simulations. – Establish the basis of design and make detailed calculations to develop the design and be responsible for the accuracy of these calculations. Check and approve calculations. – Ensure that detail design methods, standards and data used meet the Client’s requirements and/or those issued by Wood. – Prepare process flow diagrams, equipment specifications and process descriptions. Review and approve process flow diagrams, equipment specifications and process – Complete thermal designs / ratings for shell and tube exchangers and air coolers and thermal design data sheets. Review and approve thermal designs. – Prepare process specification for instrumentation and control, including control narratives, for review and approval by the Lead Process Engineer. Review and approve process specifications. – Complete hazardous area classification notes and review area classification drawings. Review and approve hazardous area classification notes. – Prepare comment issue engineering flow diagrams. Review engineering flow diagrams and submit comments to Lead Process / Project Engineer. Prepare contract engineering design (CED’s) documents, as required, to communicate changes / design information – Prepare process summaries and schedules (effluents & emissions, chemicals & catalysts, utilities, battery limits and, relief and blowdown). Review and approve process summaries and schedules. – On request, review Supplier’s quotations from a process engineering standpoint. On order placement, review Supplier drawings and documents and provide comments. – Participate in HAZOP and other safety reviews. – Participate in review of project model. – Prepare operating manuals. – Provide process support to the other engineering disciplines and construction. – Participate in technical sales activities as requested. – Perform such duties as may reasonably be assigned by the Chief / Principal Process Engineer. 

Vacancy Type

Staff / Permanent

 

 

Wood is currently looking to recruit a PMC Interface Specialist to be based in Abu Dhabi, United Arab Emirates working for our client Al Dhafra Petroleum. The successful candidate will be responsible to handle the below responsibilities and duties;   This is a FEED project which is expected to run for approximately 12 months initially with potential opportunity for extension for another 4 – ۵ years dependable on award of EPC.   Work scope is onshore oil and gas project; field expansion consisting of (new wells, flowlines, manifolds and tie-ins to existing facilities).   Purpose/Role   To provide expertise and develop coordination capability and act as a member of project teams to undertake assigned tasks.   Key Responsibilities – Contribute to develop / maintain interface management system / procedures – Monitor interface issues between contractors Attend progress or monthly meetings with relevant contractors – Contribute to monthly report and provide interfaces activies updates – Work with project team to address and mitigate interface issues – Expedite outstanding interface issues – Report open and closed interface information – Identify potential interface issues that may result in variation orders – Contribute to training and development of project staff

Vacancy Type

Fixed Term

 

 

Wood is currently looking to recruit a Senior Assets Integrity Engineer to be deployed within a client Project Management Team in PMC capacity to assist in the management of a large EPC project.   Responsibilities: – Development of client proposals and scopes of work – Involvement in the development and implementation of asset integrity management (AIMS) programs  – Evaluate asset information to determine hazards, failure modes and risk mitigations – Assessing damage mechanisms in oil and gas industries – Utilise spreadsheet and database tools to capture and manipulate data; identifying trends and equipment health concerns – KPI reporting and performance metric development for system integrity – Develop maintenance strategies using a reliability-centred maintenance approach – Updating Computerised Maintenance Management Systems (CMMS)   – Fitness for service assessment – Setup and configuration of Integrity Management Database Systems – Development of client reports to communicate results and recommendations – Assuming ownership of small projects, managing from start to finish following Wood’s Quality Management System

Vacancy Type

Fixed Term

 

 

Wood is currently recruiting for an Construction Lead for it’s client ADNOC Offshore to be based on an Island for 6 weeks on 3 weeks off rotation 7 days/ week – 12hrs/day. Below are the main responsibiilties to perform; – Participate in and advise on all mechanical and piping construction activities and initiatives – Responsible for the mechanical and piping scope to ensure the Contractor and sub-contractors perform the work to agreed scope of work, specifications and schedules all to an acceptable standard – Supervise the contractor and sub-contractor personnel to ensure contractor performs all work to agreed standards for safety, health and environment and to attaining high levels of HSE performance – Ensure assigned scope of work is carried out without any significant HSE incidents – Ensure the work is carried out in time and in accordance with scope of work, specification and quality requirement – Promote HSE awareness and ensure that all ADNOC Offshore Project HSE requirements are implemented and adhered to – Responsible for construction mechanical and piping activities through the contractors supervision in respect of HSE, method, working practices, quality and timely execution of the works – Advise mechanical and piping ADNOC Offshore Project staff on best practices – Responsible for the mechanical and piping ADNOC Offshore Project staff aspect of Risk Management to ensure all risks / opportunities are identified and appropriate controls/mitigations developed and implemented – Responsible for mechanical and piping coordination with regard to SIMOPS – Ensure that construction hazards and risks are fully considered by designers and contractors and that appropriate mitigation actions are implemented and appropriate action taken – To be fully familiar with the contractors methods of construction, schedule and procedure – Initiate and manage the mechanical and piping project element of the continuous improvement processes – Monitor site activities for potential contractual / claims problems – Maintain records of site activities and check Contractor records for accuracy – Carry out inspection, surveillance witnessing of contractor activities, ensuring records are maintained, including as-built data – Endorse daily progress report and time sheets – Detailing the work progress, number of contractor personnel and equipment available on site and other related items identified in the scope of work – Manage multi-disciplinary team of around 15 people on island including quality, safety, construction, project controls, engineering and commissioning – Management of all on island work and subcontractors including monitoring and tracking of progress, quality and safety – Management of interfaces with other island Contractors for general construction interface and tie-ins – Primary project point of contact for Operations on island for all issues resolution – Lead safety onsite

Vacancy Type

Fixed Term

 

 

Wood is currently recruiting for a PMC ICS Specialist to be based in Abu Dhabi, United Arab Emirates to work with our client Al Dhafra Petroleum. Successful candidate will be responsible for below duties and responsibilities;   This is a FEED project which is expected to run for approximately 12 months initially with potential opportunity for extension for another 4 – ۵ years dependable on award of EPC.   Work scope is onshore oil and gas project; field expansion consisting of (new wells, flowlines, manifolds and tie-ins to existing facilities).   – Design and check all Instrument work on assigned projects – Execute assigned work in accordance with the applicable Project Procedures, DDI and Standards, including Project Procedures on Safety and Quality Control, within the man-hour and cost budgets and the project schedule targets – Prepare instrument index – Develop data sheets, instrument sizing, and prepare material requisitions for all instrument items including Control Valves, Relief Valves, Flow elements, Level instruments, Temperature instruments, Analyzers and DCS / ESD / F&G systems – Manage Technical Bid Evaluation of all items – Review Piping Isometric  – Review other discipline drawings such as Equipment datasheet – Guide the designers for the preparation of Instrumentation drawings and deliverables – Prepare and check all Instrument drawings / documents and ensure that the quality of design and drawings produced for enquiry and fabrication purposes is of satisfactory standard – Attend coordination meetings and engineering review meetings with supplier as required – Assist Procurement Department with the expediting of supplier documents – Review and approve supplier documents for Instrumentation – Ensure effective & efficient Inter-discipline coordination including coordination with client engineer – Review instrument aspects of package unit supplier’s drawings

Vacancy Type

Fixed Term

 

 

 

 

Wood is currently recruiting for PMC Pipeline Specialist for its project with Al Dhafra Petroleum. This role will be based in Abu Dhabi, United Arab Emirates. Successful candidate will perform below duties and responsibilities;   This is a FEED project which is expected to run for approximately 12 months initially with potential opportunity for extension for another 4 – ۵ years dependable on award of EPC.   Work scope is onshore oil and gas project; field expansion consisting of (new wells, flowlines, manifolds and tie-ins to existing facilities). – Support the preparation and implementation of effective project execution plans & procedures – Monitor engineering design compliance to the Design Basis – Manage a defined project scope to schedule and budget – Coordinate cross discipline input into procurement and contract technical packages assigned to their area – Monitor design evolution from basic engineering to detail engineering for documents and drawings and mitigate interdisciplinary conflicts – Review discipline progress and performance on a biweekly basis with the area discipline leads and develop action plans with project discipline leads when required – Provide Area Managers with monthly progress and performance write-ups for their area for inclusion in the Project Monthly report – Develop and maintain the area action log that shows decisions and information required to maintain the area schedule – Manage the MOC process for the assigned work scope

Vacancy Type

Fixed Term

 

 

Wood is currently recruiting for PMC Mechanical (Rotating Equipment) Specialist for its project with Al Dhafra Petroleum. Role will be based in Abu Dhabi, United Arab Emirates. Successful candidate will be responsible for below duties and responsibilities;   This is a FEED project which is expected to run for approximately 12 months initially with potential opportunity for extension for another 4 – ۵ years dependable on award of EPC.   Work scope is onshore oil and gas project; field expansion consisting of (new wells, flowlines, manifolds and tie-ins to existing facilities).   – Review and approve mechanical data sheets of rotating equipment and technical bid evaluation done by EPC contractor for rotating equipment – Review and approve vendor documentation of rotating equipment as required per ITB – Assist project by providing answers to EPC contractor’s waiver requests and RFI’s related to rotating equipment – Contribute and be involved in design, engineering, P&ID reviews, HAZOPs, HAZANs and safety reviews

Vacancy Type

Fixed Term

 

 

Wood is currently seeking to recruit a PMC Process Specialist to be based in Abu Dhabi, United Arab Emirates to work with our client Al Dhafra petroleum. The successful candidate will be responsible for below responsibilities and duties;   This is a FEED project which is expected to run for approximately 12 months initially with potential opportunity for extension for another 4 – ۵ years dependable on award of EPC.   Work scope is onshore oil and gas project; field expansion consisting of (new wells, flowlines, manifolds and tie-ins to existing facilities). – Ensuring client requirements for applicable work package are incorporated into the process design by the EPC contractor – Reviewing and approving process engineering technical deliverables produced by EPC contractor for applicable work package in line with PMC Technical Assurance Plan – Providing PMC / PMT input at EPC contractor led technical and safety design review meetings – Ensuring adherence to project scope criteria as defined in project management plan (including budget / schedule), and bringing to project management attention any project activities impacting upon these – Planning, monitoring, and reporting progress for process engineering activities undertaken including obtaining resources from home office as required – Managing direct line reports on day to day basis – Liaison and interfacing with other engineering discipline leads and project functions

Vacancy Type

Fixed Term

 

 

Wood is currently recruiting for a PMC Project Control Specialist to join our team in Abu Dhabi, UAE to work on Al Dhafra Petroleum project. The successful candidate must be able to perform the below duties and responsibilities;    This is a FEED project which is expected to run for approximately 12 months initially with potential opportunity for extension for another 4 – ۵ years dependable on award of EPC.   Work scope is onshore oil and gas project; field expansion consisting of (new wells, flowlines, manifolds and tie-ins to existing facilities).   – Control, supervise, monitor and guide the day-to-day activities of the Planning and Control team – Supervise in delivering the resourced robust baseline project schedules (team size dependent) – Oversee the co-ordination and production of all project plans and associated documents (‘S’ Curves, Histograms, Tabulated man hour / progress data) – Provide the Management Team with the relevant contract information – Ensure that all services and deliverables conform to Company, Client and Project QA Plan, policies, requirements and standards – Read, understand and implement the Company Safety Policy and the arrangements described in the Company and area Safety Management System documents in relation to the Planning function – Promote good working relations within the Project Controls Teams and other project departments and client representatives – Ensure all planning work is carried out in compliance with Corporate and Project specific procedures – Control, directly supervise, monitor and guide the day-to-day activities of the Planning team – Supervise the production of resourced robust baseline project schedules – Oversee the co-ordination and production of all project plans and associated documents (‘S’ Curves, Histograms, Tabulated man hour / progress data) – Ensure the timely issue of updated plans and associated documents accurately at the agreed intervals – Liaise and interface with the Client Project Control Manager and Contract Manager on all relevant matter – Ensure that the Project Controls Manager / Project Manager / Project Engineers are aware of all planning issues – Liaise with the project team and planners to resolve conflicts – Carry out planning team competency assessment and development – Carry out all Personal Development Reviews for relevant staff members – Report at a contract level to the Management Team – Work with the Risk Team on any plans which require to be risked – Provide proposal support as required

Vacancy Type

Fixed Term

 

 

Wood is currently recruiting for a Contract Manager to oversee the overall contract management and provide the necessary support to the client in the management of the contractual issues.   The PMC Contract Manager will be report to the Project Director and will maintain direct contact with the Clients Contract team.   The project period is approximately for 2-3 years, including both EPC design review phase and construction phase. – Collaborate with the client in any matter requiring assistance with contracts – Be well informed of the development of the Project and the status of Contract Changes for the Project under execution. S/He will attend periodic project reviews to be informed of the project status at all times – Analyze Site claims and / or Contract Changes open against the Client by the EPC contractor and coordinate with the Client the appropriate response – Provide support to the Project Director in the necessary presentation, updating and negotiations until the resolution of the site claim and / or Contract Change – Provide the necessary support to Project Director to conveniently document the actions or activities that contractually require it – Actively participate, in coordination with relevant Project specialists, in any changes required in the contracts – Provide support in the contractual close out of each Project subcontractor in areas such as, e.g., refund / extension of guarantees, payment / collection of outstanding invoices, issuance of Acceptance Certificates, Mechanical Completion, etc. – Provide support to the Procurement Team in negotiations with suppliers or subcontractors – Organize the assessment and technical coordination of Contract Changes – Ensure the coordination of specialists in the review of Site Claims and / or Contract Changes – Monitor and keep records of the Client’s Project correspondence and refer it to the appropriate department to respond and take necessary actions – At site, receive the Claims of the Site Subcontractor to the Client and potential Contract Changes, and verify compliance with the contracts, the estimate of the Contract Change, and monitor the time of response time to the claim Please note that at this stage, applications for this role are invited as an Expression of Interest (EOI) whilst opportunities are being fully determined.  

Vacancy Type

Fixed Term

 

شرکت فوستر ویلر یک شرکت مشاور انگلیسی و چند ملیتی است که در زمینه مهندسی و مدیریت پروژه فعال بوده و دفتر مرکزی آن در لندن میباشد.

درباره ی estekhdam-asaluyeh.ir

همچنین ببینید

نیازمند سرآشپز،کمک آشپز و ظرف شوی در عسلویه

یک آشپز خانه ی قراردادی زیر نظر شرکت طراحی ساختمانی نفت و تامین کننده ی …

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *